Prosonic DVR Technical Information download pdf (Page 85)

Digital Video Recorder

① The system will search the data when boots. If too many data are saved in the HDD, it will take longer time; ② The

error of HDD will make the DVR to detect the HDD repeatedly.

4. Why the DVR restarts repeatedly after self detection?

① Check the HDD. If the HDD hasn’t been formatted or the HDD has fault, the DVR will be restarted; ② Check the power

supply of DVR; ③ Pull out the network cable and restart the DVR. Serious network fault may cause the DVR to restart

repeatedly.

5. Why the DVR restarts repeatedly after long time running?

① Check whether the HDD sectors are damaged; ② Check whether the video signals are normal. If it is confirmed that

abnormity ever occurred and it still restarts when video input is stopped, please cut off the power of DVR and connect

again later; ③ Check the power supply of DVR.

6. Why I can’t control the DVR with remote controller?

① If the infrared indicator on front panel isn’t lit, please check whether the battery has electricity or whether the remote

controller is damaged.

7. Why breakdown occurs in the normal video playing or viewing process?

Check whether the HDD is connected properly; replace the HDD if it is damaged.

8. Why the monitor (TV set) has no image or can’t be started after update?

Keep the power supply stable in the upgrading process. If the power supply is cut off, the update will be failed or even the

DVR can’t be started. Then, please update the DVR again. If the update fails or can’t update, please contact the supplier.

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 91 92

No comments

Prosonic DVR Technical Information Page 85